DOC022.52.80017HQd Portable Meter06/2013, Edition 4User Manual
1. Pull the release tab on the battery cover and the remove the cover.2. Install 4 AA alkaline or 4 AA nickel metal hydride (NiMH) batteries.Make sure
Figure 4 AC power connection1 USB storage device/printer/Qwertykeyboard connection (USBperipheral)4 AC-DC power supply2 Personal computer conne
Figure 6 Single screen display1 Calibration status indicator 9 Time2 Main measurement value and unit 10 Date3 IntelliCAL probe type and por
Figure 8 Dual-screen display1 Probe that is connected to port onleft3 Measurement information for probeon left2 Probe that is connected to port
Change the date and timeThe date and time can be changed from the Date & Time menu.1. Push the key and select Date & Time.2. Update the time
• the LDO sensor cap should be replaced•the calibration is out of range• the calibration results are outside acceptance criteria settingsAbout sample
View stored dataThe data log contains sample, calibration and check standard data. Themost recent data point in the data log is tagged as Data Point 0
Figure 10 Connection to the printer1 Meter 7 USB cable2 AC-DC power supply 8 USB/DC adapter3 AC power cord 9 Port for probe connection4
Open data files on a PCData that has been downloaded to a USB storage device can betransferred to a computer. The data is sent in a text (.txt) file f
Table 1 Spreadsheet column descriptions (continued)Column header name Data description and example valuesCheck Std Value Value of the check standard
Remove column headersWhen transferred data is viewed in a spreadsheet program, the first rowof data contains headings to identify the type of data in
1. Push the key and select Security Options.2. Change the settings as needed to allow or prevent menu access.Option DescriptionSecurityOptionsWhen S
Table 3 Operator access optionsOption Description(Probe model) settings Only methods (if methods exist) can be selected. Referto the probe documentat
Set the probe calibration reminderMake sure that a probe is connected to the meter.1. Push the key and select the probe settings.2. Select Modify Cu
Interval measurements are suspended for calibrations, check standardmeasurements or when the key is pushed. Interval measurementsresume when returni
4. Insert the USB storage device that contains the software update filesinto the USB/DC adapter.5. Turn on the meter.The update process starts. The di
turning off the meter and sending the entire measurement (includingcalibrations) to the PC or other information management system.About meter configur
1. Pull the release tab on the battery cover and the remove the cover.2. Remove the batteries.3. Install 4 AA alkaline or 4 AA nickel metal hydride (N
Error/Warning Description Solution0 days remainingmessage (For LDOand LBOD only)LDO or LBODsensor cap used for365 daysReplace the LDO or LBODsensor ca
Replacement parts (continued)Description Item no.Battery Contact, dual spring 5188800 Cable, USB 6 ft (1.8 m), Type A male, Type B male 5924000 Field
Table of ContentsSpecifications...
Examples of printed reportsPrinted reports contain a report header and all stored data for samples, check standards and calibrations.Report headerThe
Figure 13 Basic report for sample data—1 line1 Data type (RD=reading) 6 Units2 Parameter (pH, LDO, etc.) 7 Sample ID: user-defined; shows “SA
Figure 15 Total report for sample data—3 lines1 Method name for probe settings 4 Calibration slope/ratio/constant2 Time of calibration, preface
Calibration reportsCalibration data is printed when the data log is sent to the printer or when probe data is sent to the printer. Calibration data is
Figure 18 Calibration history report1 Report type (CH=calibration history) 5 Date of calibration (DD-MM-YY or user-defined format)2 Parameter (
IndexAAC power connection ...8auto-shutoff ...
Ttransfer datato PC ...16, 18to USB storage device ...
HACH COMPANY World HeadquartersP.O. Box 389, Loveland, CO 80539-0389 U.S.A.Tel. (970) 669-3050(800) 227-4224 (U.S.A. only)Fax (970) 669-2932orders@hac
Print stored data...
Replacement parts and accessories...
Table of Contents4
SpecificationsSpecifications are subject to change without notice.Specification DetailsDimensions 19.7 x 9.5 cm (7.75 x 3.75 in.)Weight 335 g (0.75 lb
W A R N I N G Indicates a potentially or imminently hazardous situation which, if not avoided,could result in death or serious injury.C A U T I O N In
Figure 1 Meter components (HQ40d model)1 Meter 4 AC-DC power supply2 AA batteries (pk/4) 5 USB/DC adapter3 AC power cordFigure 2 Meter com
Comments to this Manuals