Hach-lange E300 Electrode stand User Manual download pdf

DOC302.53.00787

Instruction Sheet

Electrode stand E300

Safety Information

Please read this entire document before unpacking, setting up, or operating this equipment.

Failure to do so could damage to the equipment.

To ensure that the protection provided by this equipment is not impaired, do not use or install

this equipment in any manner other than that specified in this document.

Installation

The electrode stand E300 is delivered in two parts. Before use, assemble the steel base with

its blue plastic cover and the arm part as follows.

1. Remove the circlip (Figure 2 on page 2, item 2) seated in the groove (Figure 2 on page 2,

item 4) at the lower end of the pivot.

2. Insert the pivot (Figure 2 on page 2, item 1) in the base (Figure 2 on page 2, item 3) and

turn the E300 upside down (Figure 2 on page 2, item 5) so that the metal part of the base

is uppermost.

Figure 1 Electrode stand E300

1 Holder head 4 Base

2 Friction screw 5 Springs

3 Arm

1 2

Summary of Contents

Page 1 - Instruction Sheet

1DOC302.53.00787Instruction SheetElectrode stand E300Safety InformationPlease read this entire document before unpacking, setting up, or operating thi

Page 2 - Electrode stand E300

HACH COMPANYWORLD HEADQUARTERSTelephone: (970) 669-3050FAX: (970) 669-2932FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:Call 800-227-4224Co