Hach-lange PHC301-03 Instruction Sheet User Manual download pdf

DOC302.53.00752

Instruction Sheet

PHC301-01 or PHC301-03 Probe

Safety

To ensure that the protection provided by this equipment is not impaired, do not use or install

this equipment in any manner other than that specified in this document.

Overview

Figure 1 shows the PHC301-01 or PHC301-03 Probe, a refillable single-junction combination

pH electrode with a built-in temperature sensor, which is equipped with either a 1- or 3-meter

cable. The probe is designed for fast, accurate pH measurement in wastewater, drinking

water, and general applications.

A 30-milliliter (mL) bottle of reference electrolyte filling solution (3M KCl solution saturated with

AgCl, Cat. No. 28417-00) is included with the electrode.

Each electrode is supplied with color-code clips for easy identification. There are two each of

five colors (black, yellow, light green, light blue, and magenta), one for the electrode and one

for the cable connector.

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.

Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12

August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European

electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to

the user.

Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return

end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.

Figure 1 PHC301-01 or PHC301-03 Probe

1 Sensor Array, including pH and Temperature Sensors 4 1- or 3-meter Cable

2 Filling Hole and Cap 5 Electrode Storage Cap Lid

3 Color-code Clip locations 6 Electrode Storage Cap

1 2 3 4

Summary of Contents

Page 1 - Instruction Sheet

1DOC302.53.00752Instruction SheetPHC301-01 or PHC301-03 ProbeSafetyTo ensure that the protection provided by this equipment is not impaired, do not us

Page 2 - Maintenance

2AssemblyImportant Note: When taking a sample reading, the filling hole must be open.1. Remove the electrode from the electrode storage cap (Figure 1,

Page 3 - Specifications

3Storage• Between uses, in intervals of up to two hours, store the electrode in the sample (if the sample pH is not extreme), or in a neutral solution

Page 4 - FAX: (970) 669-2932

HACH COMPANYWORLD HEADQUARTERSTelephone: (970) 669-3050FAX: (970) 669-2932FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:Call 800-227-4224Co