Hach-lange LDO101-30 Instruction Sheet User Manual download pdf

LDO101R89

Instruction Sheet

LDO101-05, LDO101-10, LDO101-15, or LDO101-30 Probe

CAUTION

BEFORE ATTACHING THE PROBE FOR THE FIRST TIME: Set the date and time in the

meter before attaching the probe for the first use. If the meter date and time are

changed after the probe is installed, the probe will retain an incorrect time stamp for the

remainder of its service life, even if the meter time and date are later corrected.

Safety

To ensure that the protection provided by this equipment is not impaired, do not use or install

this equipment in any manner other than that specified in this document.

CAUTION

When deploying the probe at a distance, toss the probe body with a gentle underhand

throw. Swinging the probe by the cable may cause injury to the user, will cause severe

strain on the probe cable, and will shorten service life. Damage incurred in this manner

will not be covered by the product warranty.

Overview

Figure 1 shows the LDO101-05, LDO101-10, LDO101-15, or LDO101-30 Probe, a

luminescent dissolved oxygen (LDO) probe with a bell-and-ring shroud. The probe can

be equipped with a 5-, 10-, 15-, or 30-meter cable. The probe is designed for fast, accurate

measurement of dissolved oxygen concentration in wastewater, drinking water, and

general applications.

Each probe is supplied with color-code clips for easy identification. There are two each of five

colors (black, yellow, light green, light blue, and magenta), one for the probe and one for the

cable connector. Attach a pair of color-code clips to the probe and cable connector.

Replacement sensor caps (including the iButton

*) are available (Cat. No. 58112-00).

Optional probe-cable depth markers are also available (Cat. No. 58286-10).

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.

Electrical equipment marked with this symbol may not be disposed of in European public

disposal systems after 12 August of 2005. In conformity with European local and national

regulations (EU Directive 2002/96/EC), European electrical equipment users must now return old

or end-of life equipment to the Producer for disposal at no charge to the user.

Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return

end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.

* iButton is a registered trademark of Maxim Integrated Products, Inc.

1 2 3 4

Summary of Contents

Page 1 - Instruction Sheet

1LDO101R89Instruction SheetLDO101-05, LDO101-10, LDO101-15, or LDO101-30 ProbeCAUTIONBEFORE ATTACHING THE PROBE FOR THE FIRST TIME: Set the date and t

Page 2

2LDO101-05, LDO101-10, LDO101-15, or LDO101-30 ProbeRemoving and Replacing the ShroudImportant Note: Do not remove the cable from the probe. Doing so

Page 3 - Calibration

3LDO101-05, LDO101-10, LDO101-15, or LDO101-30 ProbeReplacing the Shroud1. Place the locking ring (Figure 2, item 2) on the probe body with the thread

Page 4 - Specifications

HACH COMPANYWORLD HEADQUARTERSTelephone: (970) 669-3050FAX: (970) 669-2932FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:Call 800-227-4224Co