Hach-lange PHC101-03 Instruction Sheet User Manual download pdf

DOC302.53.00753

Instruction Sheet

PHC101-01 or PHC101-03 Probe

Safety

To ensure that the protection provided by this equipment is not impaired, do not use or install

this equipment in any manner other than that specified in this document.

Overview

Figure 1 shows the PHC101-01 or PHC101-03 Probe, a non-refillable gel-filled combination

pH electrode with a built-in temperature sensor, which is equipped with either a 1- or 3-meter

cable. The probe is designed for fast, accurate pH measurement in wastewater, drinking

water, and general applications.

Each electrode is supplied with color-code clips for easy identification. There are two each of

five colors (black, yellow, light green, light blue, and magenta), one for the electrode and one

for the cable connector.

This symbol, if noted on the instrument, references the instruction manual for operation and/or safety information.

Electrical equipment marked with this symbol may not be disposed of in European public disposal systems after 12

August of 2005. In conformity with European local and national regulations (EU Directive 2002/96/EC), European

electrical equipment users must now return old or end-of life equipment to the Producer for disposal at no charge to

the user.

Note: For return for recycling, please contact the equipment producer or supplier for instructions on how to return

end-of-life equipment, producer-supplied electrical accessories, and all auxiliary items for proper disposal.

Figure1ThePHC101-01orPHC101-03Probe

1 Sensor Array, including pH and Temperature Sensors 4 1- or 3-meter Cable

2 Reference junction (remove protective film before use) 5 Electrode Storage Cap Lid

3 Locations for color code clip installation 6 Electrode Storage Cap

1 2 3 4

Summary of Contents

Page 1 - Instruction Sheet

1DOC302.53.00753Instruction SheetPHC101-01 or PHC101-03 ProbeSafetyTo ensure that the protection provided by this equipment is not impaired, do not us

Page 2 - Maintenance

2Assembly1. Remove the electrode from the electrode storage cap (Figure 1, item 6).2. Remove the film that covers the two reference junctions (Figure

Page 3 - Specifications

3SpecificationsSpecifications are subject to change without notice.pH Range 2.0 to 14.0 pHSodium (Alkalinity) Error –0.6 pH at pH 12.6 in 1 M NaOHTemp

Page 4 - FAX: (970) 669-2932

HACH COMPANYWORLD HEADQUARTERSTelephone: (970) 669-3050FAX: (970) 669-2932FOR TECHNICAL ASSISTANCE, PRICE INFORMATION AND ORDERING:Call 800-227-4224Co