User ManualDOC022.52.80197General use pH probe: Models PHC20101, PHC20103Safety informationPrecautionary labelsRead all labels and tags attached to th
2. Fill the probe storage cap or soaker bottle half full with Hach Electrode Storage Solutionor 3 M potassium chloride (KCl) solution.3. Put the soake
Message or symptom Possible cause ActionCalibration errors Calibration not done correctly Recalibrate using freshly prepared pH buffers.Contaminated g
12 DOC022.52.80197
HACH COMPANY World HeadquartersP.O. Box 389, Loveland, CO 80539-0389 U.S.A.Tel. (970) 669-3050(800) 227-4224 (U.S.A. only)Fax (970) 669-2932orders@hac
Figure 1 Probe overview1 Probe soaker bottle 4 Reference junction2 Standard probe (1 or 3 meter cable) 5 Glass bulb and temperature sensor3 Soaker bo
Calibration notes• pH buffers can be used in any order. Use buffers that are two pH units apart.• Additional standard sets along with the minimum numb
Sample measurementBefore measurement:The probe must have the correct service-life time stamp. Set the date and time in the meter before the probe is a
Run a check standardThe run check standard feature validates instrument performance between samplemeasurements. Use the run check standard feature for
Change measurement optionsMethods are groups of default or user-defined settings relevant to specific applications. Ifthe meter is set to the default
4. Select Calibration Options and update the settings:Option DescriptionBuffer Set Sets the temperature compensated buffer set used for calibration—•
Table 2 Custom buffer setsBuffer set values Option DescriptionStd1Std2Std3Std4Std51.09pH—25 °C Pre-set temperature compensated buffer values.Note: Se
5. Select Check Standard Reminder and update the settings:Option DescriptionReminder Repeat Sets the time interval for the check standard reminder—Off
Comments to this Manuals